Knowledge/Glossary
English

Glossary

Grouped by the layer of the device each term describes.

Installation

backset

The distance from the edge of the door to the centre of the handle bore, usually 2 3/8 or 2 3/4 inches (60 or 70 mm) in North America.

See also: bored lock, mortise lock

bored lock

A lock installed through two round holes drilled in the door, one through the face for the handle and one into the edge for the latch.

Also called: cylindrical lock, bored cylindrical lock

See also: mortise lock, backset, thumbturn, cross bore, edge bore

cross bore

The large round hole drilled through the face of a door for a bored lock, 2 1/8 inches (54 mm) on most North American lock sets.

The cross bore takes the body of the lock and the spindle that links the two handles. Its distance from the edge of the door is the backset, which is what decides whether a given lock fits a given prepared door.

Also called: crossbore, face bore

See also: bored lock, edge bore, backset

cylinder

The removable part of a lock that holds the secret: the keyway, the pins, and the cam or tailpiece that turns the bolt. Change the cylinder and you change who can open the door, without touching the rest of the lock.

The cylinder is what made locks serviceable. Before it, changing who could open a door meant changing the lock. Linus Yale Jr.'s 1865 patent describes the separation directly: a tumbler-case that screws into the lock body, can be set to different depths for different door thicknesses, and can be fitted to either side to make the lock right or left handed.

Every lock tradition since has kept the idea and disagreed about the packaging. Europe standardized the cylinder's outline so that cylinders became interchangeable between makers. North America standardized the holes in the door instead, leaving the cylinder inside a lockset, where it is rekeyed rather than swapped. Japan largely kept manufacturer-specific families.

For a motorized lock the cylinder matters twice: its inside key or thumbturn is what a retrofit clamps onto in Europe, and it is what a key still turns when the batteries are flat.

Also called: lock cylinder, barrel, core

See also: euro cylinder, tailpiece, deadbolt

door edge

The narrow face of a door. On the edge opposite the hinges sit the lock's faceplate and its bolts.

A door has two faces and four edges, but in lock vocabulary the door edge is the vertical one opposite the hinges, the edge that meets the frame when the door closes. That edge is where the lock shows: its faceplate, flush with the wood, and the bolts that come out of it. A bored lock reaches its latchbolt through a hole drilled into that edge, the edge bore, and the backset is measured from the edge to the centre of the knob or lever.

See also: faceplate, edge bore, backset

edge bore

The smaller hole drilled into the edge of a door to meet the cross bore at a right angle, 1 inch (25 mm) on most North American lock sets.

The edge bore houses the latch unit. Where a mortise lock needs a rectangular cavity cut with a router or a jig, the pair of bored holes can be cut with a hole saw and a spade bit, which is the whole economic argument for the architecture.

Also called: latch bore

See also: bored lock, cross bore

escutcheon

A single long plate spanning a handle and whatever sits above it, typically a cylinder, thumbturn or keypad, holding them in one register.

An escutcheon has three jobs at once. It hides the bores and through-bolts left by installation, it carries components that need to sit a fixed distance apart, and on graded hardware it protects the cylinder from drilling and from being gripped and snapped.

On electronic locks it does more than that. Keypad, reader, antenna, batteries and often the motor all live in the escutcheon, so the plate stops being a cover and becomes the chassis.

Also called: escutcheon trim, backplate

See also: trim, rose, lock case

euro cylinder

The dominant European cylinder outline: a circle above a narrow body, a section of 17 by 33 by 10 mm, sold in lengths measured as two halves from the central fixing screw. Any cylinder of the profile, in the right length, fits any lock case cut for it.

The euro profile standardizes a shape rather than a product, which is why a cylinder is a commodity in Europe and a lockset is not. Rekeying a door is a purchase and one screw.

Length is the part people get wrong. A cylinder is specified as two numbers, the distance from the fixing screw to the outside end and to the inside end, so a 30/40 and a 40/30 are different parts and fitting one backwards leaves the cylinder standing proud on the street side, which is both ugly and easier to attack. Lengths come in 5 mm steps.

Two variants matter for smart locks. A thumbturn cylinder presents a knob on the inside for a motor to grip. An emergency function cylinder lets the outside key turn while a key is still in the inside, which manufacturers of European retrofits routinely require, and which has no equivalent on an American deadbolt because its inside face is a thumbturn rather than a keyway.

The oval found in Britain beside the euro profile, Scandinavia's bolted oval and Switzerland's round profile are separate formats. They are not euro cylinders and will not enter a euro cutout.

Also called: euro profile, profile cylinder, DIN cylinder

See also: cylinder, thumbturn, retrofit

faceplate

The narrow plate along the edge of the door that closes the mortise pocket and carries the bolts through it. Manufacturers often call it the lock front.

With the door open, the faceplate is the part of a mortise lock that shows on the edge, which makes its height the quickest way to tell a mortise installation from a bored one. Bored locks show a small latch face a little over two inches tall; mortise faceplates run to eight inches on commercial series.

Also called: lock front, front plate

See also: mortise lock, lock case

leaf

The moving panel of a door, as opposed to the frame it swings against. Also called the slab.

Worth having a word for, because almost everything a lock does happens at the joint between two parts: the leaf that moves and the frame that does not. Bolts project from the leaf, strikes are fixed to the frame, and every alignment problem in door hardware is the leaf and the frame drifting apart.

Also called: door leaf, slab, panel

See also: strike, backset

lock case

The steel box holding a mortise lock's mechanism, sized to drop into the pocket cut in the edge of the door.

Everything that moves in a mortise lock is mounted inside the case: the hub the handle turns, the cylinder, the bolts, and the linkage between them. Because the case aligns those parts against each other rather than against the door, the mechanism can be pulled out and replaced as one serviceable unit.

Also called: case, lock body

See also: mortise lock, faceplate

mortise lock

A lock whose body sits inside a rectangular pocket cut into the edge of the door, so the mechanism is buried in the door rather than bolted through it.

Mortising a door means cutting a deep rectangular cavity into its edge. The lock case slides into that cavity and is held by a faceplate along the door edge. All of the working parts, the latch, the deadbolt, the hub the handle turns, live inside that single case.

The trade-off is labour against capability. Cutting a mortise takes a router or a dedicated mortising jig and cannot be undone if it goes wrong. In exchange the case has room for a larger mechanism, which is why heavy commercial hardware and most multipoint European locks are mortise designs.

Also called: mortise, mortice

See also: bored lock, backset, deadbolt, lock case, faceplate

retrofit

A device that mounts over hardware you already own and motorizes the gesture you used to perform on it, usually replacing no more than the interior thumbturn: the mechanism, the keys and the door preparation all stay.

Retrofit is a pattern, not a lock category. The unit grips the actuator your hand used, a thumbturn or a key left in a European cylinder, and turns it on command. On an American deadbolt it takes the interior thumbturn's place and drives the tailpiece behind it. Because nothing enters the door, the door's own dimensions mostly stop mattering; the main thing to check is whether the clamp closes around the part that turns.

The same pattern covers garage kits that wire onto an existing opener, which is why a lock database can file one under this appellation without contradiction. The cost is symmetric with the promise: you keep the mechanism, so you keep every flaw it had, now fought by a motor instead of your wrist.

Also called: retrofit lock, conversion kit

See also: actuator, thumbturn, deadbolt

rose

A small independent plate, usually circular, fitted behind a handle alone. It surrounds the handle and nothing else.

Because a rose covers only the handle, a lock trimmed with roses needs separate parts for anything else on that face: a collar around the cylinder, a plate behind a thumbturn. That is the visual difference between rose trim and escutcheon trim at a glance, and it corresponds to different door preparation templates.

Also called: rose trim, rosette

See also: trim, escutcheon, lever

sectional trim

Trim supplied as separate pieces for the handle and for the cylinder or thumbturn, rather than as one full-length plate.

Sectional trim is the middle option between roses and a full escutcheon: the parts are separate, as with roses, but styled as a set. The mechanism inside the door is unchanged, which is the point. Trim style is a variation of one lock, not a different lock.

Also called: sectional, sectional escutcheon

See also: trim, escutcheon, rose

strike

The plate fixed to the door frame that a bolt lands in, with an opening for the bolt and a face for the door to close against.

The strike does more work than it looks. Its face is what depresses a deadlatch pin, so the size and position of its opening decide whether the deadlatch mechanism functions at all.

Also called: strike plate, keeper

See also: latchbolt, deadbolt, deadlatch

tailpiece

The flat blade on the back of an American deadbolt's cylinder that carries the turning motion into the bolt mechanism. It is what a North American retrofit motor grips once the interior rose is removed.

On a bored deadbolt the exterior cylinder and the interior thumbturn are two halves of one assembly, joined through the door by a tailpiece. Turn the key or turn the thumb, and the same blade drives the bolt.

That blade is the reason the American retrofit category exists in the shape it does. A retrofit replaces the interior half, keeps the exterior cylinder and its keys, and drives the tailpiece with a motor instead of a thumb. The exterior of the door does not change, the keys keep working, and nothing new is drilled.

It is also the reason those products stop at the Atlantic. A European door presents a key left in its cylinder, or the cylinder's thumbturn, to the room, not a tailpiece, so there is nothing for the same mechanism to hold.

Also called: tail piece, torque blade

See also: deadbolt, cylinder, retrofit

trim

The collective name for the visible hardware fixed to the faces of a door: the plates, roses, escutcheons and levers a person sees and touches.

Trim is the industry's umbrella word, and in Europe the equivalent term is door furniture. It covers the parts that mount on the door faces rather than inside the door, which is why a manufacturer can offer one mechanism with several trims and sell the result as several products.

Also called: door furniture, operating trim

See also: escutcheon, rose, actuator

Bolt

bevel

The sloped face of a latchbolt, which lets the frame push the bolt back into the case as the door swings shut.

The bevel has to face the direction the door closes, which is why installation instructions call it out explicitly. Fitted backwards, the latch cannot ride over the strike and the door will not close.

Also called: bevelled face

See also: latchbolt, strike

bolt

The metal piece that comes out of a lock and engages the frame to hold the door shut. Locks use several kinds: the latchbolt, the deadbolt and the deadlatch.

Every lock that holds a door shut does it with a bolt: the part that crosses the gap between the door and the frame and sits in the strike. What tells one bolt from another is what pushes it back. A latchbolt retracts when the door is pushed shut or the handle is turned, a deadbolt only when someone turns a key or a thumbturn, and a deadlatch adds a pin that stops it being pushed back once the door is closed.

See also: latchbolt, deadbolt, deadlatch, strike

deadbolt

A square-ended bolt with no spring, thrown and withdrawn only by a key, a thumbturn or a motor, so it cannot be pushed back into the door.

Also called: dead bolt, deadlock

See also: mortise lock, thumbturn

deadlatch

A latchbolt fitted with a small auxiliary pin beside it. While the strike holds that pin depressed, the latchbolt cannot be pushed back into the case.

The auxiliary pin goes by several manufacturer names: deadlatch pin, guard bolt, auxiliary linchpin, deadlocking plunger. All of them describe the same trick. The pin stands proud while the door is open and is pressed flat by the strike when the door closes, and while it is flat it blocks the latchbolt from being pushed back.

A deadlatch is why a commercial or hotel door can be locked at all times without a deadbolt being thrown. It is also why a door that has sagged out of alignment can look locked and not be: if the pin lines up with the opening in the strike rather than its face, nothing holds it flat.

Also called: dead latch, deadlocking latch

See also: latchbolt, strike, deadbolt

latchbolt

The sprung bolt with a bevelled face that holds a door closed, retracting on its own when the door is pushed shut and when the handle is turned.

A latchbolt keeps a door closed rather than locked. Because it is sprung, it can be pushed back into the case, which is what lets a door slam shut without anyone touching the handle and also what makes a plain latchbolt no obstacle to anybody willing to work at it.

Also called: latch bolt, latch

See also: deadbolt, mortise lock, bored lock

plunger

The small spring-loaded piece beside the latchbolt of a deadlatch. When the door closes, the strike holds it pressed in, and that blocks the latchbolt so it can no longer be pushed back.

Manufacturers give the plunger several names: auxiliary bolt, guard bolt, deadlatch pin, deadlocking plunger. Whatever the name, the plunger stands proud while the door is open and is pressed in by the strike when the door closes, and while it is pressed in, the latchbolt cannot be pushed back. The plunger does not stop a card slipped into the gap: the card still reaches the latchbolt, which simply can no longer move.

Also called: auxiliary bolt, guard bolt, deadlocking plunger

See also: deadlatch, latchbolt, strike, bolt

throw

How far a bolt projects from the lock when fully extended, measured from the faceplate.

Throw is a security number and a geometry number at once. A longer bolt reaches further into the frame and survives more spreading of the opening, but it also needs the frame prepared deeply enough to receive it.

Also called: bolt throw, projection

See also: deadbolt, latchbolt

Actuator

actuator

Any part a person operates to move a bolt: a lever, a knob, a thumbturn, a thumbpiece, a key or a motor standing in for one of them.

Actuator is the third of the three planes that describe a lock. Installation architecture says what shape of hole the lock needs, bolt type says what holds the door, and the actuator plane says what a hand touches. Naming the plane keeps sentences honest, because a phrase like "a lever lock" describes only the third one and is often read as describing all three.

Also called: operating trim

See also: lever, knob, thumbturn, thumbpiece

knob

A round handle that retracts a latchbolt when twisted. Mechanically equivalent to a lever, but it demands grip and wrist rotation.

The knob is not a worse mechanism than the lever, it is a worse interface. BHMA's own guidance is that knob trim should be avoided on accessible routes, which is why the knob has retreated to residential interiors while the lever took over commercial buildings.

Also called: knob trim, doorknob

See also: actuator, lever, latchbolt

lever

A horizontal handle that retracts a latchbolt when pushed down. The default actuator on accessible and commercial routes, because it needs no grip strength.

A lever is a lever in the mechanical sense too, which is why hardware standards test what happens when people hang bags and bodies on them. It also has to be handed: a lever points left or right, and unlike a knob it cannot be fitted to either side of a door without thought.

Also called: lever handle, lever trim

See also: actuator, knob, latchbolt

thumbpiece

The pivoting tab above the grip of a handleset, pressed with the thumb to retract the latchbolt.

The thumbpiece is the only common actuator that converts a straight push into rotation: pressing it turns a cam, and the cam withdraws the latchbolt. It belongs to grip-handle entry sets, where the hand pulls the door by a fixed handle rather than turning anything.

Also called: thumb latch, thumb piece

See also: actuator, latchbolt, lever

thumbturn

The small lever on the inside face of a lock that throws or withdraws the bolt by hand, with no key.

Also called: thumb turn, turn knob

See also: deadbolt, bored lock

Credential

Aliro

A Connectivity Standards Alliance standard, published at 1.0 in February 2026, for the conversation between a reader and the phone or wearable presenting a credential. It covers NFC, Bluetooth LE, and Bluetooth LE with ultra-wideband.

Aliro standardises the moment of presentation, not the plumbing behind the door. Before it, a phone-as-key deployment meant picking a lock vendor and inheriting its proprietary handshake, which is why digital keys arrived in wallets one brand at a time.

The specification names three transports for three gestures: NFC for tap, and Bluetooth LE for a deliberate action at a distance, and Bluetooth LE with ultra-wideband for hands-free approach where distance has to be measured rather than guessed. Credentials rest on asymmetric cryptography, and the Apple, Google and Samsung wallets are committed to carrying them.

It belongs on a different axis from Matter and Thread. Those answer how a decision reaches a lock; Aliro answers how a person proves who they are at it. Matter's Door Lock cluster already carries optional features for provisioning an Aliro credential, so the two meet without overlapping.

Also called: aliro 1.0

See also: credential, credential path, Matter

credential

Whatever a person presents to be let in: a cut key, a PIN, a card, a phone, a fingerprint.

A credential is what distinguishes a locked door from a merely closed one. A door that anybody can open by turning a handle asks for nothing; a locked door demands proof of authorization, and the form that proof takes is what the whole credentials plane is about.

Note the separation. A credential authorizes. An actuator moves the bolt. A key is unusual in being both at once, which is part of why keys made the two ideas hard to tell apart for a century.

Also called: credentials

See also: actuator, deadbolt

Connectivity

border router

The function that joins a Thread mesh to the home's IP network. It routes packets between the two and reads none of their contents, so it grants reachability and never speaks on a platform's behalf.

The Thread specification defines a border router as a function, not a device, which is the most useful sentence anyone has written about it. The function is folded into products bought for other reasons: smart speakers, streaming boxes, smart displays, mesh Wi-Fi nodes. Most homes running a Thread device already own one without having shopped for it.

What it does is narrow on purpose. A Thread mesh carries IPv6 but cannot reach the wider network alone, and the border router is the pair of feet standing in both, one radio on the mesh and Wi-Fi or Ethernet on the other side. The Matter session it enables stays end to end between controller and device.

That is the whole difference from a hub. A hub terminates the device's protocol and re-exposes it through its own cloud, so it can issue commands, including credentials. A border router forwards traffic it cannot interpret. Reading "a border router is present" as "this platform can create an access" is the most common mistake in the category.

Also called: thread border router, tbr

See also: Thread, Matter, hub

bridge

A single-brand range extender: it speaks one manufacturer's radio to that manufacturer's device on one side, and Wi-Fi to that manufacturer's cloud on the other.

A bridge adds reach, not intelligence. Both ends belong to the same vendor, so the device's software identity does not change when you add one: the same app, the same cloud, the same account, now reachable from outside the building. Matter uses the word differently, for a device that brings non-Matter devices into a Matter network.

Because the bridge must keep an internet radio alive continuously, it is mains powered, while the device it serves runs on batteries. That division of labour is the reason the category exists.

Also called: wifi bridge, bluetooth bridge

See also: hub, gateway

bus termination

A resistor at each far end of a bus, matched to the cable's characteristic impedance, fitted so a signal reaching the end is absorbed instead of reflected.

A long pair carrying fast edges behaves as a transmission line: an edge arriving at an unterminated end bounces back down the cable and adds itself to whatever is arriving next. Terminating with a resistor equal to the cable's characteristic impedance leaves nothing to reflect.

RS-485 cable is conventionally 120 Ω, so the convention is one 120 Ω resistor at each end of the trunk, two in total, and never one per device (SLLA272D). The same document is where the stub rule comes from: the drop from the trunk to each device should be short, because a long stub is an unterminated branch of its own.

Also called: terminating resistor, line termination, 120 ohm termination

See also: RS-485, RS-485 transceiver

cluster

A numbered package of commands and attributes covering one function. A device declares the clusters it implements, which is how software knows what it is talking to.

Zigbee sorts everything a device can do into clusters. A bulb implements On/Off and Level Control. A lock implements Door Lock, which holds lock, unlock, set a code, clear a code, schedules and the events that report who opened. A device announces the clusters it carries, and a controller reads that announcement to find out what it is dealing with.

The number is part of the name, and it is where the history shows. The Door Lock cluster is 0x0101 in the Zigbee Cluster Library, and it is 0x0101 in Matter too, because the Connectivity Standards Alliance that publishes Matter is the Zigbee Alliance renamed, and Matter's data model was built from the library it already owned. The old SetPINCode family survives inside Matter beside the newer credential model, for locks that never learned it.

Z-Wave has no clusters. It groups the same ground into command classes, Door Lock, User Code, Schedule Entry Lock and Notification, written by a different company and arriving at nearly the same verbs.

Also called: zigbee cluster, door lock cluster

See also: Zigbee, Matter, Z-Wave

differential signaling

Sending one bit as the difference between two wires rather than as a voltage against ground, so interference that hits both wires equally cancels out.

The receiver subtracts one conductor from the other and reads only the result. Because the two conductors are twisted together and run side by side, an interfering field couples into both almost identically, so it lands in the subtraction as a common term and disappears. Texas Instruments describes it as noise coupling "equally into both signal lines as common-mode noise, which is rejected by the differential receiver input" (SLLA272D).

This is not unique to RS-485. Copper Ethernet is differential too, and so is CAN. What differs between them is not the trick but how much common-mode offset the receiver will tolerate, and how many devices are allowed to share the pair.

Also called: balanced transmission, differential pair

See also: RS-485, RS-485 transceiver

gateway

A box that fronts a fleet of local or wired devices to a network, so management software can reach them in real time.

Gateways are the commercial answer to the same problem bridges solve for a single home, at a different scale and with different assumptions. They are usually powered by the building rather than a wall socket, often over Ethernet or from an access control panel, they serve a bounded number of devices each, and the thing on the far side is management software rather than a consumer app.

Also called: access control gateway, wireless gateway

See also: bridge, hub

hub

A multi-vendor radio platform. It speaks a standard such as Zigbee, Z-Wave, Thread or Matter to devices from many brands, and presents them all through its own platform.

The difference between a hub and a bridge is ownership, not size. A bridge extends one vendor's system. A hub absorbs devices into its own: the hub's platform becomes the software identity through which the device is named, automated and controlled, and the manufacturer's own app may become secondary or absent.

Also called: smart home hub, controller

See also: bridge, gateway

Matter

An IP-based application layer: the shared vocabulary a controller and a device use once they can already reach each other. It has no radio of its own and runs over Thread, Wi-Fi or Ethernet.

Matter answers one question: what do two devices say to each other. It does not answer how the signal travels, which is why the phrase on a box is always "Matter over" something. Bluetooth LE appears in the picture only for commissioning, the introduction that puts a device onto the network in the first place.

Its device types are built from clusters, and the Door Lock cluster does include credentials: PIN codes, RFID, fingerprint, face, and provisioning for Aliro. The detail that decides what a platform can actually do is that these are optional features. A lock declares the ones its hardware supports, and a lock with no keypad and no reader declares none of them, leaving a controller with lock, unlock and status.

The property people buy Matter for is multi-admin: several controllers from different vendors holding their own credentials on the same device, none of them the master.

Also called: matter over thread, matter over wifi, chip

See also: Thread, border router, credential

OSDP

Open Supervised Device Protocol. The access control industry's open protocol for talking to readers, carried on an RS-485 bus.

Created in 2008 by Mercury Security and HID Global (HID Global), transferred in 2012 to the Security Industry Association, which maintains it (SecurityInfoWatch), approved by the IEC in May 2020 and published as IEC 60839-11-5, with SIA OSDP v2.2 following in December 2020 (Impro's OSDP FAQ).

It supplies everything RS-485 leaves out. One control panel addresses one peripheral device at a time, only the panel may speak without being spoken to, and a device must answer an addressed message within 200 ms (LibOSDP protocol notes, an implementation of the IEC standard). Secure Channel adds AES-128 encryption of the traffic between reader and panel, which, when it is switched on, is the part that makes tapping the cable useless.

The interface the specification describes is RS-485 only. Asked in 2020 whether OSDP could run over Ethernet, Allegion answered that it could not, and that SIA was looking at extending it (OSDP Q&A, October 2020).

Also called: Open Supervised Device Protocol, IEC 60839-11-5

See also: RS-485, Wiegand, credential

RS-485

An electrical-only standard for putting a signal on a twisted pair, written so that many devices can share the same pair. It defines voltages, not messages.

RS-485 describes what a driver must put on the line and what a receiver must be able to read back: a differential output of at least 1.5 V, a receiver that detects down to 200 mV, and tolerance for the whole pair floating anywhere between -7 V and +12 V relative to the receiver's own ground. It also specifies that a driver can be switched off entirely, which is what allows several devices to share one pair.

It defines nothing above that. No addresses, no message format, no error check, no rule about who may transmit. Texas Instruments puts it plainly: the standard "only defines the electrical characteristics of drivers and receivers", and is "intended to be referenced by higher level standards" (The RS-485 Design Guide, SLLA272D). In access control that higher level standard is usually OSDP; in building automation, BACnet MS/TP or Modbus RTU.

Also called: RS485, TIA-485, EIA-485, TIA/EIA-485-A

See also: RS-485 transceiver, differential signaling, bus termination, OSDP

Thread

A low-power IPv6 mesh network on the IEEE 802.15.4 radio. It carries addresses and routes packets, and deliberately defines no application layer, so it cannot by itself tell a lock to lock.

Thread is the half of a protocol that most people assume is the whole thing. It gives every device an IPv6 address and relays traffic between battery devices and mains-powered routers, and then it stops. The Thread Group tells implementers to select an application layer of their own, from a liaison organisation or built in house.

That gap is why Thread and Matter are almost always named together: Matter is the application layer that fills it. A Thread network with no application layer above it can be joined and addressed, and nothing on it can be asked to do anything.

The radio underneath is the same IEEE 802.15.4 used by Zigbee, and chips exist that run both at once. A Thread mesh cannot reach the wider IP network on its own; that requires a border router.

Also called: thread mesh

See also: Matter, border router, Zigbee

RS-485 transceiver

The small chip between a device's serial port and the two bus wires. It can drive the pair, listen to it, or let go of it electrically.

A transceiver contains a driver and a receiver sharing the same two pins. The driver has a third state beyond high and low: disabled, in which its outputs present a high impedance and stop influencing the line at all. The receiver keeps working while the driver is disabled, so a device that is not talking is still listening.

That third state is the whole reason a shared bus is possible. A firmware line usually called DE or driver enable turns the driver on for the length of one reply and off again, and everything above it, the addressing, the polling, the turnaround timing, exists to make sure two drivers are never enabled at once.

Also called: transceiver, line driver, RS-485 driver

See also: RS-485, differential signaling

Wiegand

The legacy reader interface: two data wires carrying a credential number one way, from one reader, in the clear, on its own cable run back to the panel.

The word does double duty. It names a card technology, and it names the wiring interface that outlived it. As an interface it is about as simple as a digital link can be: the reader pulses one of two data lines per bit, the panel counts the pulses, and that is the entire conversation.

Its limits follow from that simplicity. Communication runs one way only, so the panel cannot ask a reader anything, configure it, update it, or notice it has gone quiet. The cable runs from one reader directly to the panel and serves that reader alone, up to 500 ft (152 m) (Schlage multi-technology reader data sheet). And the credential number crosses that cable unencrypted, on the unsecured side of the door, which is what OSDP's Secure Channel was written to end.

Also called: Wiegand interface, Wiegand protocol

See also: OSDP, credential, RS-485

Z-Wave

A low-power mesh protocol on the sub-gigahertz bands, 908.42 MHz in North America and 868 MHz in Europe, complete from the radio up to an application layer whose command classes include writing user codes into a lock.

Z-Wave's distinguishing choice is physical: it sits below a gigahertz, away from the 2.4 GHz band shared by Wi-Fi, Bluetooth, Zigbee and Thread. Longer waves pass through masonry better and the neighbourhood is quieter, which is why Z-Wave has a reputation for reaching the far end of a house.

Above the radio it is a full stack. Behaviour is expressed as command classes, and the User Code command class lets a controller store a PIN in a numbered slot on a lock. That is what makes a Z-Wave hub a genuine access-creating system rather than a remote button.

The cost of the design is concentration. Z-Wave silicon has effectively had one supplier for most of the protocol's life, and certification runs through a single alliance. The upside of the same fact is that interoperability between certified products is tested rather than hoped for.

Also called: zwave, command class

See also: Zigbee, hub, credential

Zigbee

A low-power mesh protocol that runs the whole way from the antenna to the command: an IEEE 802.15.4 radio at the bottom, its own network layer above it, and an application layer that already knows what a door lock and a user code are.

Zigbee is a complete stack, which is why a Zigbee device needs nothing invented for it. Its application layer is organised into clusters, and one of them is a Door Lock cluster carrying commands to set and clear PIN codes. A hub that speaks Zigbee can therefore manage credentials on a lock that implements those commands, without the manufacturer's cooperation.

The radio is IEEE 802.15.4, in practice on 2.4 GHz for smart-home products. That is the same radio Thread uses, and a single chip can run both. Everything that separates the two protocols sits above the antenna.

Zigbee devices have no IP address. Reaching one from outside the building always means a box that terminates Zigbee and starts something else, which is the defining property of a hub.

Also called: zigbee 3.0, zigbee cluster library

See also: Thread, Z-Wave, hub

System

credential path

The way a platform controls a lock it never contacts: it encodes the credential the lock accepts, and the credential carries the decision to the door.

On the credential path, the platform writes its decisions into the credential itself, at an encoder or an online wall reader, and the lock merely verifies what it is shown. The lock needs no network, and "no radio, therefore not controllable" is a false inference: hotel card locks and data-on-card estates are controlled this way at scale.

Also called: credential-path

See also: device path, credential, provider

device path

The way a platform controls a lock by talking to it: its cloud reaches the device, directly or through a bridge or gateway, and commands travel to the door.

On the device path, the platform and the lock are in contact: a command leaves the cloud, crosses the internet and a radio or a bus, and a motor moves. The lock's reachability becomes part of the system: if the box in the middle is offline, the door cannot be commanded, though it keeps enforcing whatever it already knows.

Also called: device-path

See also: credential path, bridge, gateway, provider

egress

Leaving a building. US building codes require a door on an escape route to open from the inside without a key and, outside dwelling and sleeping units, in a single motion.

Egress is the constraint that outranks every other requirement placed on a lock. Under US building codes it is why a deadbolt keyed on both faces is not allowed on an occupied dwelling's exit door, and why interconnected locks exist at all: where code permits only one motion to release everything, a latchbolt and a deadbolt have to retract together. Dwelling and sleeping units are the exception: there a separate deadbolt is allowed, provided it opens from the inside without a key.

Everywhere else, whatever a lock does to the outside world, it has to undo itself from the inside, in one gesture, for somebody who is panicking.

Also called: free egress, means of egress

See also: deadbolt, thumbturn

provider

The software platform that can create an access on a device: one provider per platform, not per brand. A manufacturer may run several, and an offline lock still has one.

A provider is not the name on the lock. It is the platform that holds the accounts, issues the credentials and exposes the integration surface. One manufacturer may operate several (Salto KS and Salto Space are two providers from one company), and one provider may serve hardware from many brands. DeviceDB attaches providers to a device model because that, not the logo, decides what software can do with the device.

Also called: system, platform

See also: credential

Smart Locks
Access Systems
Lock Capabilities
Thermostats
Sensors
© 2026 Seam Labs, Inc.