Troubleshooting: Avigilon Alta Entrance Requires Setup

Last updated

An Avigilon Alta entrance in Seam has an "entrance setup required" warning, and you can't add it to an Access Grant or unlock it with a PIN code. The warning message tells you which of the causes below applies.

"This entrance shares a zone with other entrances in Avigilon Alta…"

Seam's Access Grants let you grant access to individual doors. For Avigilon Alta, Seam does this through zones, so each entry needs its own zone. When several entries share a zone, Seam can't grant access to one of them without the others.

  1. Sign in to Avigilon Alta Access.

  2. Go to Sites > Zones, click +, and create a zone named after the entry, on the same site.

  3. Go to Sites > Entries, open the entry, set its Zone to the new zone, and save.

  4. Repeat for every entry that shares a zone.

Seam picks up the change on its next sync, within about 10 minutes, and the warning clears.

"This entrance has no controller or wireless lock assigned in Avigilon Alta…"

In Alta, every entry needs hardware to open the door: a controller (an ACU, Video Reader Pro, or Video Intercom Reader Pro) or a wireless lock. This entry has none, so there's nothing for Seam to unlock.

  • If it's a real door, go to Sites > Entries, open the entry, and select its hardware in Controller.

  • If it's unused (for example, a test or placeholder entry), you can delete it in Alta or ignore the warning.

"This entrance uses a Schlage wireless lock in Avigilon Alta…"

Seam doesn't support entries secured by Schlage wireless locks (NDEB, LEB or Control) in Avigilon Alta yet. Contact Seam support if you need these entries supported.

Still having issues?

Contact Seam support at support@seam.co and include the entrance ID or connected account ID.

More in Connecting Your Devices

Still need help? Our support team will take a look.

Smart Locks
Access Systems
Lock Capabilities
Thermostats
Sensors
© 2026 Seam Labs, Inc.