Example TLV1.0A/Reviewed November 13, 2026
Tedee logo

Cheat sheet: Tedee model IDs

TLV, a hardware version, then a letter for the color, which tedee prints on the label and DeviceDB does not keep. A short reference, fully documented by tedee, and a clear case of what a catalog keeps and what it drops.

Tedee's reference is short, and tedee documents all of it: a prefix, a hardware version, and a letter for the color. What this sheet adds is the gap between that reference and the one DeviceDB holds.

How the model ID is composed

TLV + hardware version + color letter

TLV1.0 is the tedee PRO, TLV2.0 the tedee GO, and the GO 2 as well: tedee's declaration of conformity names both products under that one model (TLV2.0 declaration), and its own page lists the GO as "Model TLV2.0" (tedee GO). The PRO manual is titled for TLV1.0 and TLV1.1 (PRO manual). After the version comes a letter for the color variant, covered below. The PRO's declaration also lists models followed by HK (TLV1.0 A HK), which tedee's documents do not explain and this sheet does not guess (TLV1.0 declaration).

How a finish is expressed

As a letter after the version. Both manuals use the same sentence: "The color variant of the product is marked with a letter at the end of the model name, on the label and on the product rating plate", and the GO manual gives the example of a TLV2.0 "in color variant A", marked TLV2.0A (GO manual). The declarations of conformity list A, B and C, then X for "any letter of the English alphabet". No tedee document read for this sheet says which letter is which color.

DeviceDB does not keep that letter. It lists the Tedee PRO as TLV1.0[-BLK] and TLV1.0[-SLV], and the Tedee GO as TLV2.0[-BLK] and TLV2.0[-SLV]: tedee's version, then a color suffix of DeviceDB's own, in brackets. The color is in both references. The spelling is not the same.

How a trim is expressed

Not applicable. A tedee turns a European cylinder from the inside and has no trim of its own: the PRO mounts on a tedee-ready cylinder or an adapter, both separate accessories, and the GO goes over the existing cylinder, onto its key.

How a radio is expressed

Not in the identifier. Both versions are Bluetooth LE; Wi-Fi comes from the tedee bridge, sold separately, and the GO's later Matter-over-Thread support, added by firmware update, is a product fact rather than a code. And since the GO and the GO 2 share TLV2.0, the version does not always tell you which product you are holding.

Model IDs in DeviceDB

6 identifiers across 5 models
Smart Locks
Access Systems
Lock Capabilities
Thermostats
Sensors
© 2026 Seam Labs, Inc.