Skip to main content
To use Seam with Sensibo devices, ask the device owner to complete the steps below. Each Sensibo device must already be installed, connected to Wi-Fi, and paired with its air conditioner before proceeding.

1. Set up the Sensibo mobile app

  1. Download and install the Sensibo app and create an account if you don’t have one.
  2. In the Sensibo app, add each Sensibo device and follow the steps to pair it with the air conditioner’s remote control.
  3. Confirm that you can turn the air conditioner on and off from the Sensibo app.

2. Create a Sensibo API key

  1. Sign in at home.sensibo.com with the account to which the devices are registered.
  2. Open Menu, then API.
  3. Create an API key and copy it.
A Sensibo API key gives access to every device in the Sensibo account. Create a key for Seam only, so that you can remove it without affecting other integrations.

3. Connect Sensibo to Seam

  1. In the form to connect Sensibo to Seam, paste the API key.
  2. Click Submit to complete.

Disconnecting

To stop Seam from accessing a Sensibo account, delete the connected account in Seam and then delete the API key at home.sensibo.com.

Troubleshooting

If the form does not accept the API key:
  • Check that you copied the whole key.
  • Confirm that the key is still listed at home.sensibo.com.
If devices don’t appear after connecting your account:
  • Verify that each device is online in the Sensibo app.
  • Confirm that the API key belongs to the account to which the devices are registered.
  • Seam lists only the Sensibo devices that control an air conditioner. Sensibo Pure, Sensibo Elements, and the Sensibo Room Sensor do not appear.
If the air conditioner does not respond to a command from Seam:
  • Check that the same command works from the Sensibo app.
  • Make sure that nothing blocks the line of sight between the Sensibo device and the air conditioner.