Overview
Sensibo makes smart controllers for air conditioners and heat pumps. A Sensibo device sits in the room and controls a mini-split, window, or portable air conditioner with the same infrared signals as the unit’s own remote control. This adds remote control, temperature and humidity readings, and scheduling to air conditioners that have no built-in connectivity. Seam represents each Sensibo device that controls an air conditioner as a thermostat. You can set the air conditioner to heat or cool at a set point, turn it off, and read the room temperature and humidity.Supported Devices
This integration supports the Sensibo devices that control an air conditioner: Sensibo Sky, Sensibo Air, and Sensibo Air Pro. Sensibo Pure air purifiers, Sensibo Elements air quality monitors, and the Sensibo Room Sensor are not supported and do not appear in Seam. For the current status of each Sensibo device, see our Sensibo Supported Devices page.Supported Features
We support the following features:- Configuring current thermostat settings: heat, cool, and off
- Creating and managing climate presets
- Creating and managing thermostat schedules
- Reading the room temperature and relative humidity
device.can_hvac_heat and device.can_hvac_cool capability flags. For more information, see Thermostat Capabilities.
Device Provider Key
Seam identifies these devices with thesensibo device provider key. By default, a Connect Webview displays all of the stable providers that Seam supports, so your users can connect their Sensibo devices without you specifying a provider list. To narrow what a Connect Webview displays, see Customize the Brands to Display in Your Connect Webviews.
Setup Instructions
For instructions on connecting Sensibo devices to Seam, see the Sensibo Setup Guide.Brand-Specific Restrictions
Note the following Sensibo-specific restrictions:Settings Are Sent, Not Confirmed
A Sensibo device controls the air conditioner with one-way infrared signals. The air conditioner does not report back, so neither Sensibo nor Seam can confirm that it received a command. Thecurrent_climate_setting that Seam reports is the last setting sent to the air conditioner, not a reading from the unit.
For commands to arrive reliably, the Sensibo device needs a clear line of sight to the air conditioner’s infrared receiver. If someone changes a setting with the air conditioner’s own remote control, Seam’s reported setting can be out of date.
Set Points
Each air conditioner accepts a fixed list of set points for each mode, usually whole degrees. Seam rounds a requested set point to the nearest value that the air conditioner accepts. A set point outside the accepted range fails with anout_of_range_setpoints_error. Seam reports the range for each mode on the device as min_heating_set_point_celsius, max_heating_set_point_celsius, min_cooling_set_point_celsius, and max_cooling_set_point_celsius (or _fahrenheit).
Heat-Cool Mode
Sensibo devices do not support setting heat-cool (auto) mode through Seam, anddevice.can_hvac_heat_cool is not set. The automatic mode on an air conditioner uses a single target temperature, not separate heating and cooling set points.
If someone sets the air conditioner to automatic mode in the Sensibo app, Seam reports hvac_mode_setting as heat_cool with the heating and cooling set points both equal to that target temperature.