Skip to main content

Overview

This guide walks you through connecting the thermostats on a Resideo Connect account to Seam. Your thermostats must already be set up and visible in the Resideo Connect app before proceeding.

Step 1: Connect to Seam via Connect Webview

  1. Open the Connect Webview provided by your application.
  2. Select Resideo Connect as the provider.
  3. Log in with your Resideo Connect account credentials.
  4. Once authorized, your thermostats appear as devices in Seam.

Step 2: Verify the Connection

After connecting, verify that your thermostats appear as devices and show as online with heating, cooling, and thermostat program capabilities.

Troubleshooting

Authorization fails in Connect Webview

Verify that you are using your Resideo Connect account credentials. A Resideo app account (used for Honeywell Home thermostats) is a separate account and doesn’t work here; connect those thermostats through Honeywell Resideo instead.

Devices not appearing after authorization

Ensure your thermostats are set up and online in the Resideo Connect app. Only devices that are active and connected appear in Seam.