> ## Documentation Index
> Fetch the complete documentation index at: https://www.seam.co/docs/llms.txt
> Use this file to discover all available pages before exploring further.

# Sensibo Thermostats

> Guide for using Sensibo air conditioner controllers with Seam. Review supported devices, features, restrictions, and setup instructions for your integration.

![Sensibo logo](https://seam-ecosystem-media.fly.storage.tigris.dev/curated/manufacturers/e2ae8cc2-7b55-4b0f-8e34-88ab9c65755e/square_logo-f61868f13ad8b27e9b0fa69f3a638b2437245e4bd4682e9367266dc1847f20e6.png)

Sensibo

## Overview

Sensibo makes smart controllers for air conditioners and heat pumps. A Sensibo device sits in the room and controls a mini-split, window, or portable air conditioner with the same infrared signals as the unit's own remote control. This adds remote control, temperature and humidity readings, and scheduling to air conditioners that have no built-in connectivity.

Seam represents each Sensibo device that controls an air conditioner as a thermostat. You can set the air conditioner to heat or cool at a set point, turn it off, and read the room temperature and humidity.

***

## Supported Devices

Green checks show supported capabilities. Expand a device for provider requirements and compatible accessories.

Supported devices and requirements

View all devices and providers from this manufacturer.

This integration supports the Sensibo devices that control an air conditioner: Sensibo Sky, Sensibo Air, and Sensibo Air Pro.

Sensibo Pure air purifiers, Sensibo Elements air quality monitors, and the Sensibo Room Sensor are not supported and do not appear in Seam.

For the current status of each Sensibo device, see our [Sensibo Supported Devices page](https://www.seam.co/manufacturers/sensibo).

***

## Supported Features

We support the following features:

* [Configuring current thermostat settings](https://www.seam.co/docs/capability-guides/thermostats/configure-current-climate-settings.md): heat, cool, and off
* [Creating and managing climate presets](https://www.seam.co/docs/capability-guides/thermostats/creating-and-managing-climate-presets.md)
* [Creating and managing thermostat schedules](https://www.seam.co/docs/capability-guides/thermostats/creating-and-managing-thermostat-schedules.md)
* Reading the room temperature and relative humidity

Each device reports the modes that its air conditioner supports. To check, [get the device](https://www.seam.co/docs/capability-guides/thermostats/retrieving-thermostats.md) and look at the `device.can_hvac_heat` and `device.can_hvac_cool` capability flags. For more information, see [Thermostat Capabilities](https://www.seam.co/docs/capability-guides/thermostats.md#thermostat-capabilities).

***

### Device Provider Key

Seam identifies these devices with the `sensibo` device provider key. By default, a [Connect Webview](https://www.seam.co/docs/core-concepts/connect-webviews.md) displays all of the stable providers that Seam supports, so your users can connect their Sensibo devices without you specifying a provider list. To narrow what a Connect Webview displays, see [Customize the Brands to Display in Your Connect Webviews](https://www.seam.co/docs/core-concepts/connect-webviews/customizing-connect-webviews.md#customize-the-brands-to-display-in-your-connect-webviews).

***

## Setup Instructions

For instructions on connecting Sensibo devices to Seam, see the [Sensibo Setup Guide](https://www.seam.co/docs/device-and-system-integration-guides/sensibo-thermostats/sensibo-setup-guide.md).

***

## Brand-Specific Restrictions

Note the following Sensibo-specific restrictions:

### Settings Are Sent, Not Confirmed

A Sensibo device controls the air conditioner with one-way infrared signals. The air conditioner does not report back, so neither Sensibo nor Seam can confirm that it received a command. The `current_climate_setting` that Seam reports is the last setting sent to the air conditioner, not a reading from the unit.

For commands to arrive reliably, the Sensibo device needs a clear line of sight to the air conditioner's infrared receiver. If someone changes a setting with the air conditioner's own remote control, Seam's reported setting can be out of date.

### Set Points

Each air conditioner accepts a fixed list of set points for each mode, usually whole degrees. Seam rounds a requested set point to the nearest value that the air conditioner accepts. A set point outside the accepted range fails with an `out_of_range_setpoints_error`. Seam reports the range for each mode on the device as `min_heating_set_point_celsius`, `max_heating_set_point_celsius`, `min_cooling_set_point_celsius`, and `max_cooling_set_point_celsius` (or `_fahrenheit`).

### Heat-Cool Mode

Sensibo devices do not support setting heat-cool (auto) mode through Seam, and `device.can_hvac_heat_cool` is not set. The automatic mode on an air conditioner uses a single target temperature, not separate heating and cooling set points.

If someone sets the air conditioner to automatic mode in the Sensibo app, Seam reports `hvac_mode_setting` as `heat_cool` with the heating and cooling set points both equal to that target temperature.

### Dry and Fan Modes

Seam does not represent an air conditioner's dry and fan-only modes. If someone selects one of these modes in the Sensibo app, Seam continues to report the last heat, cool, or off setting.

### Fan Speed

Seam does not support setting the fan mode on Sensibo devices. When Seam sets a mode, the air conditioner keeps its current fan speed if that speed is available in the new mode.

### Weekly Programs

Seam does not support [thermostat weekly programs](https://www.seam.co/docs/capability-guides/thermostats/creating-and-managing-thermostat-programs.md) on Sensibo devices. Use [thermostat schedules](https://www.seam.co/docs/capability-guides/thermostats/creating-and-managing-thermostat-schedules.md) instead.

### Update Frequency

Seam reads the state of Sensibo devices every 10 minutes. A change made in the Sensibo app can take that long to appear in Seam.

### Battery State

Sensibo devices are mains-powered, so Seam does not report a battery state for them.

***

## Where to Order

> [card] [Sensibo - Smart AC Controllers](https://sensibo.com/)


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.